Combat Ready Swords

Combat Ready Swords - High-Quality Handcrafted Swords Forged by Master Craftsmen from World-Renowned Toledo Steel in Toledo, SpainCombat Ready Swords - RealCoolSavings.com - Real Cool Stuff at GREAT SAVINGS...Why shop elsewhere?
Combat Ready Swords - Toledo Swords Combat Ready Swords - Toledo Sword

Home - Toledo Sword
Home - Real Cool Savings
Support



Combat Ready Swords
Reenactment Combat Ready Swords

Toledo Swords ™ : Collectible Heirloom Armory




# SFMZ101H100S Handmade Templar Knight Medieval Combat Sword by Mariano Zamorano of Toledo Spain
Click to Enlarge

Handmade Templar Knight Medieval Combat Ready Sword
by Mariano Zamorano of Toledo Spain
Battle Ready

Item # SFMZ101H100S
The Handmade Templar Knight Medieval Combat Sword
The Functional Templar Knight Medieval Battle Sword by Mariano Zamorano of Toledo Spain is a hand forged replica reproduction of a Templar Knight medieval combat sword circa the 13th century and displays the Templar Cross on the pommel. This functional medieval broad sword was painstakingly hand made with a carbon steel blade as well with trimmings made by hand in iron by the world famous, fifth generation, Toledo Spain swordsmith Mariano Zamorano. Bearing the famous "MZ" trademark, this limited production sword is a prized collectible for the discriminating collector.

This fully functional Combat Ready Handmade Medieval Templar Knight sword is tailored to meet the demands of reenactment and stage combat.

  • Overall length: 49"
  • Blade Length: 39"
  • Blade Material: Hand Forged Carbon Steel
  • Handle Material: Genuine Leather Wrapping - trimmings made by hand in iron
  • Excellent balance
  • Factory: Mariano Zamorano , Toledo Spain
  • Rated: Fully Functional - (not honed) - Meets the demands of re-enactment and stage combat
  • This sword is entirely made by hand and thus may display the visual "imperfections" of being handcrafted
  • This item is hand made to order - eta is 4-6 months
  • Custom Made Sheath available
    $1160.99 each

    # RCCASSHFCFL02TS Paul Chen Modern Fencing Practice Foil
    Click to Enlarge

    Paul Chen Modern Fencing Practice Foil
    by Hanwei

    Item # RCCASSHFCFL02TS
    The Paul Chen Modern Fencing Practice Foil
    The Paul Chen Modern Fencing Practice Foil is used for practice sessions by fencers worldwide. This sport fencing weapon is ideal for the recreational fencer. Featuring a blade of tempered high-carbon steel, forged under strict quality control standards, the weapon is built for the foil fencing discipline. The handle is molded rubber, with an aluminum guard and plated steel pommel. The Paul Chen Modern Fencing Practice Foil is weighted for exact balance.

    This fully functional Combat Ready Modern Fencing Practice Foil sword is tailored to meet the demands of reenactment and stage combat.

  • Overall Length: 42 3/8"
  • Sword Weight: 8 oz
  • Blade Length: 35"
  • Blade Material: High-carbon forged steel blade
  • Handle Material: Molded rubber, aluminum guard, plated steel pommel
  • Excellent handling and balance
  • Authentic styling
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $92.50 each Sale $83.50

    # RCCASSH2201TS Paul Chen Hutton Sabre
    Click to Enlarge

    Paul Chen Hutton Sabre
    by Hanwei

    Item # RCCASSH2201TS
    The Paul Chen Hutton Sabre
    One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military saber. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this fencing style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre deuling at the Military Masters School in Rome.

    The hilt of the Combat Ready Paul Chen Hutton Fencing Saber , with its stainless steel guard and wire-wrapped sharkskin-pattern grip , is designed to the style of the true military sabre. The high-carbon flex-tempered steel blade has a rounded tip for effective training and safety.

    This fully functional Combat Ready fencing saber sword is tailored to meet the demands of reenactment and stage combat.

  • Overall Length: 37 1/4"
  • Sword Weight: 1 lb. 6 oz
  • Blade Length: 31"
  • Blade Material: High-carbon Flex-Tempered steel blade
  • Replacement Blade Available
  • Handle Material: Stainless Steel Guard; wire-wrapped sharkskin-pattern grip
  • Excellent handling and balance
  • Authentic Deuling Sabre styling
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $170.00 each

    # RCCASSH2200TS Paul Chen Radaelli Sabre
    Click to Enlarge

    Paul Chen Radaelli Sabre
    by Hanwei

    Item # RCCASSH2200TS
    The Paul Chen Radaelli Saber
    One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military saber. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this fencing style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre deuling at the Military Masters School in Rome.

    The hilt design developed by Radaelli has been reproduced in the Combat Ready Paul Chen Radaelli Fencing Saber , with a stainless steel guard and wire-wrapped sharkskin-pattern grip. The high-carbon flex-tempered steel blade closely follows the proportions of the period and are button-tipped for safety. A replacement blade is available for the Paul Chen Radaelli Sabre.

    This fully functional Combat Ready fencing saber sword is tailored to meet the demands of reenactment and stage combat.

  • Overall Length: 40 1/4"
  • Sword Weight: 1 lb. 7 oz
  • Blade Length: 33 3/4"
  • Blade Material: High-carbon Flex-Tempered steel blade
  • Replacement Blade Available
  • Handle Material: Stainless Steel Guard; wire-wrapped sharkskin-pattern grip
  • Excellent handling and balance
  • Authentic Deuling Sabre styling
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $183.00 each

    # RCCASSH2199TS Paul Chen Pecoraro Sabre
    Click to Enlarge

    Paul Chen Pecoraro Sabre
    by Hanwei

    Item # RCCASSH2199TS
    The Paul Chen Pecoraro Sabre
    One of the rapidly growing arts within historical fencing societies is that of sabre fencing in the late 19th century Italian style, originating with fencing masters who were employed to train mounted troops in the effective use of the military saber. The Milanese fencing master Guiseppe Radaelli, is credited with starting the development of this fencing style, while Salvatore Pecoraro introduced changes and refinements which resulted in the technique finally adopted for sabre deuling at the Military Masters School in Rome.

    The hilt design developed by Pecoraro has been reproduced in the Combat Ready Paul Chen Pecoraro Fencing Saber , with a stainless steel guard and wire-wrapped sharkskin-pattern grip. The high-carbon flex-tempered steel blade closely follows the proportions of the period and are button-tipped for safety. A replacement blade is available for the Paul Chen Pecoraro Sabre.

    This fully functional Combat Ready fencing saber sword is tailored to meet the demands of reenactment and stage combat.

  • Overall Length: 40 1/4"
  • Sword Weight: 1 lb. 5 oz
  • Blade Length: 34"
  • Blade Material: High-carbon Flex-Tempered steel blade
  • Replacement Blade Available
  • Handle Material: Stainless Steel Guard; wire-wrapped sharkskin-pattern grip
  • Excellent handling and balance
  • Authentic Deuling Sabre styling
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $204.00 each

    # RCCASSH2208TS Paul Chen Solingen Main Gauche Dagger
    Click to Enlarge

    Paul Chen Solingen Main Gauche Dagger
    by Hanwei

    Item # RCCASSH2208TS
    The Paul Chen Solingen Main Gauche Dagger
    The Combat Ready Solingen Main Gauche Dagger is historically based on models of 17th century main gauche daggers of Germanic ancestry. The Solingen Main Gauche Dagger with the matching Rapier Sword is an excellent rendition of the timely originals. The blades are constructed of forged high-carbon steel and are equipped with leather scabbards.

    This main gauche and the matching rapier blade produced by Hanwei are now interchangeable with blunted Practical Sparring blades (orderable upon request) , which are designed for safety in rapier sparring. Also available are antiqued versions of the Solingen Rapier with matching main gauche (orderable upon request).

    This fully functional Combat Ready rapier sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 17 1/4"
  • Blade Length: 11 1/4"
  • Blade Material: High-carbon forged steel blade , tempered , sharp point
  • interchangeable blunted Practical Sparring blades are orderable at $45.00 each
  • Handle: Wire wrapped handle with steel guard and pommel
  • Perfect balance
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Scabbard: leather
  • Rated: Fully Functional Combat Ready Sword
    $178.00 each

    # RCCASSH2076TS Paul Chen Practical Basket Hilt Mortuary Sword
    Click to Enlarge

    Paul Chen Practical Basket Hilt Mortuary Sword
    by Hanwei

    Item # RCCASSH2076TS
    The Paul Chen Practical Basket Hilt Mortuary Sword with Scabbard
    The Combat Ready Paul Chen Practical Basket Hilt Mortuary Sword is built for the re-enactor. Replicated from an original in the collection of the Royal Armouries in England , the Mortuary Hilt Sword is a classic example of a cavalry or dragoon officer�s sword of the 17th century English Civil War period. Deriving its name from the style of sword which memorialized King Charles I, who was executed in 1649, The Mortuary Hilt Sword�s steel basket is decorated with scrolled foliage . The blade is unsharpened, with a 1/16� edged and a rounded tip, complying with the combat rules of many re-enactment societies.

    This fully functional Combat Ready rapier sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 37"
  • Sword Weight: 2 lbs
  • Blade Length: 30 1/2"
  • Point of Balance: 4"
  • Point of Percussion: 29"
  • Width at Guard: 1.05"
  • Width at Tip: .52"
  • Thickness at Guard: .22"
  • Thickness at Tip: .11"
  • Blade Material: High-carbon forged steel blade , unsharpened
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Scabbard: Leather covered
  • Rated: Fully Functional Combat Ready Sword
  • Authentic styling
  • Great for re-enactors
    $294.00 each

    # RCCASSH2059TS Paul Chen Practical Basket Hilt Broadsword Sword
    Click to Enlarge

    Paul Chen Practical Basket Hilt Broadsword Sword
    by Hanwei

    Item # RCCASSH2059TS
    The Paul Chen Practical Basket Hilt Broadsword Sword with Scabbard
    The Combat Ready Paul Chen Practical Basket Hilt Broadsword is built for the re-enactor. The blade is unsharpened, with 1/16� safety edges and rounded tips, complying with the combat rules of many re-enactment societies. The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while providing resilience and protection against brittleness. The scabbard is finished in matte black, ready for owner customization if desired.

    Although Basket Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the seventeenth and eighteenth century Scottish highlander has become legendary. Early highland swords almost invariably carried the double-edged "broadsword" blade but by the time of the Battle of Culloden (1746) the single-edged "backsword" was at least equal in popularity.
    This fully functional Combat Ready broad sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 38 1/8"
  • Sword Weight: 2 lbs
  • Blade Length: 31 3/4"
  • Handle Length: 6 1/2"
  • Blade Material: High-carbon forged steel blade , unsharpened
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Scabbard: Matte Black finish
  • Rated: Fully Functional Combat Ready Swords
  • Authentic styling
  • Great for re-enactors
  • Complies with safety requirements
    $294.00 each

    # RCCASSH1098TS Paul Chen Practical Rapier Sword
    Click to Enlarge

    Paul Chen Practical Rapier Sword
    by Hanwei

    Item # RCCASSH1098TS
    The Paul Chen Practical Rapier Sword
    The Combat Ready Practical Rapier utilizes the SCA ( Society for Creative Anachronism )combat approved 43" Schlager blade. The tapered blade form provides superior balance compared to the traditional parallel sided schlagers of the same length, making for a faster sword. The high-carbon steel blade provides good flexibility and is button-tipped for safety.

    This fully functional Combat Ready rapier sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 49 1/4"
  • Sword Weight: 2 lbs 5 oz
  • Blade Length: 43"
  • Blade Material: High-carbon forged steel blade , tapered , Button-tipped
  • replacement blades are orderable at $59.00 each
  • Factory: Hanwei China
  • Designer: Paul Chen
  • SCA approved
  • Rated: Fully Functional Combat Ready Sword
    $265.00 each

    # RCCASSH2000TS Paul Chen Sir William Marshall Sword
    Click to Enlarge

    Paul Chen Sir William Marshall Sword
    by Hanwei

    Item # RCCASSH2000TS
    The Paul Chen Sir William Marshall Sword
    The Combat Ready single-hand Sir William Marshall Sword sets new standards of quality and authenticity in broadsword construction. The sword is based on an original , now in a British musuem , used by one of England�s finest knights, Sir William Marshall, who served the crown faithfully under Henry II , Richard the Lionheart and Jack Lackland. The singlehand Sir William Marshall Sword is available with either a forged high-carbon steel blade (below) or a forged - folded Swedish powder steel Damascus blade ( orderable upon request - $819.00 ). Both blades are identical in handling characteristics and both are tempered to a tough HRC 52. The blade section features a central ridged fuller and full-length distal taper - a tough test for the bladesmith but resulting in a superb combination of speed and strength. The grip is leather wrapped and laced and the guard and pommel are elegant in their functional simplicity. The scabbard is leather covered with steel mounts. Truly a sword for the connoisseur.

    This fully functional Combat Ready broad sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 40"
  • Sword Weight: 2 lbs 2 oz
  • Blade Length: 33 1/4"
  • Blade Material: High-carbon forged steel blade
  • Handle Material: Leather wrapped
  • Scabbard: Leather covered with steel mounts
  • Authentic replica of a museum piece
  • Excellent balance
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Swords
    $440.00 each Sale $305.00

    # RCCASSH2046TS Paul Chen Practical Single Hand Sword
    Click to Enlarge

    Paul Chen Practical Single Hand Sword
    by Hanwei

    Item # RCCASSH2046TS
    The Paul Chen Practical Single Hand Sword
    The Combat Ready Practical Single-Hand Sword is based on the Sir William Marshall sword , so named for one of England�s finest knights of the latter half of the 12th century. The sword is classically styled , with a cruciform hilt , wheel pommel and a ridged and fullered blade that is both stiff and surprisingly light. With a weight of less than 2 � lbs. , the sword can be wielded forcefully without undue wear and tear on the arm.

    The Combat Ready Practical SingleHand Sword is styled on authentic historical swords but it is tailored to meet the needs of the re-enactor for stage combat at a very affordable price. This very popular and affordable weapon features authentic hilt styling , with a fully tempered un-edged and un-pointed blade. The Practical Single Hand Sword is designed to withstand rugged use while providing the level of safety required by many of today�s re-enactment societies. The blade is crafted from 1065 high-carbon steel , hardened to HRC 50 , which restricts edge notching to acceptable levels while providing resilience and protection against brittleness. While the blade is substantial , it is fullered to provide balance and good handling characteristics. The Combat Ready Practical SingleHand Sword blade features 1/16" wide edges and a rounded tip for safety. The tang is also substantial , with radiused corners at the blade shoulder and no welds. The end of the tang is riveted over the pommel , which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grip is leather covered. The scabbard is fabricated in glass-filled resin, to provide great impact resistance , to eliminate swelling and to minimize blade corrosion problems. The scabbard now features belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona.

    This fully functional Combat Ready broad sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 36 1/2"
  • Sword Weight: 2 lbs 7 oz
  • Blade Length: 30"
  • Blade Material: High-carbon forged steel blade 1/16" wide edges and a rounded tip for safety
  • Handle Material: Hardwood grip , Leather covered
  • Scabbard: Wood grained finish
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $180.00 each

    # RCCASSH2047TS Paul Chen Practical Viking Sword
    Click to Enlarge

    Paul Chen Practical Viking Sword
    by Hanwei

    Item # RCCASSH2047TS
    The Paul Chen Practical Viking Sword by Hanwei


    The Combat Ready Paul Chen Practical Viking sword by Hanwei is based on the Godfred sword , whose design originated in 9th century Scandinavia. The lobate pommel and down-turned guard are typical of Viking swords of the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced and, with a weight slightly over 2 lbs., it is very quick.

    The Practical broadswords are all based on authentically styled swords in the Paul Chen collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today�s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16� wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grips are leather-covered. The scabbards are fabricated in glass-filled resin, to provide great impact resistance, to eliminate swelling and to minimize blade corrosion problems. The scabbards now feature belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona.

    This fully functional Combat Ready broad sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 33 1/2"
  • Sword Weight: 2 lbs 2 oz
  • Blade Length: 28"
  • Handle Length: 5 3/4"
  • Blade Material: High-carbon forged steel blade
  • Handle Material: Leather wrapped
  • Scabbard: glass-filled resin , wood-grain finish
  • Authentic styled sword of a museum piece
  • Excellent balance
  • Made for the re-enactor , Complies with safety requirements
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $160.00 each

    # RCCASSH2034TS Paul Chen Hand-and-a-Half Sword
    Click to Enlarge

    Paul Chen Hand-and-a-Half Sword
    by Hanwei

    Item # RCCASSH2034TS
    The Paul Chen Hand-and-a-Half Sword
    The Combat Ready Paul Chen Hand-and-a-Half Sword is authentically replicated from a sword thought to be that of Albrecht II of Austria and represents the pinnacle of beauty and balance in medieval swords. Classically simple in design with a flattened diamond-section blade and cruciform hilt, the original sword dates from the early part of the 15th century. The "Lion Rampant" emblem of the Habsburg dynasty is engraved in the pommel, while the Passau "Running Wolf" guild mark and a marigold maker�s mark appear on the blade fuller. Both the grip and the scabbard of the half and a half sword are leather covered over a cord wrap. Fully functional and ready for re-enactment battles, the Paul Chen Hand-and-a-Half Sword offers excellent handling and balance.

    This fully functional Combat Ready broad sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 44 1/2"
  • Sword Weight: 3 lbs 4 oz
  • Blade Length: 34 3/4"
  • Handle Length: 10"
  • Blade Material: High-carbon forged steel blade
  • Handle Material: Leather covered ,Cord Wrapped
  • Excellent handling and balance
  • Point of Balance: 5 1/2"
  • Point of Percussion: 21 1/2"
  • Width at Guard: 2"
  • Width at Tip: 0.9"
  • Thickness at Guard: 0.24"
  • Thickness at Tip: 0.20"
  • Scabbard: Leather covered
  • Authentic replica of Museum Piece
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $440.00 each Sale $305.00

    # RCCASSH2106TS Paul Chen Practical Hand-and-a-Half Sword
    Click to Enlarge

    Paul Chen Practical Hand-and-a-Half Sword
    by Hanwei

    Item # RCCASSH2106TS
    The Paul Chen Practical Hand-and-a-Half Sword
    The Combat Ready Practical Hand and a Half sword is styled on a Albrecht II of Austria sword , a classic design from the early part of the 15th century , with a simple cruciform hilt , flattened diamond section blade and typical hand-and-a-half grip. With a weight of just 3 � lbs. , the Practical Hand and a Half sword handles very well without tiring the reenactor during a long day in the field.

    The styling of the Combat Ready Practical Hand and a Half Sword is based on an authentic historical sword but it is tailored to meet the needs of the re-enactor for stage combat at a very affordable price. This very popular and affordable weapon features authentic hilt styling , with a fully tempered un-edged and un-pointed blade. The Practical Hand and a Half Sword is designed to withstand rugged use while providing the level of safety required by many of today�s re-enactment societies. The blade is crafted from 1065 high-carbon steel , hardened to HRC 50 , which restricts edge notching to acceptable levels while providing resilience and protection against brittleness. While the blade is substantial , it is fullered to provide balance and good handling characteristics. The Combat Ready Practical HandandaHalf Sword blade features 1/16" wide edges and a rounded tip for safety. The tang is also substantial , with radiused corners at the blade shoulder and no welds. The end of the tang is riveted over the pommel , which both eliminates any possibility of inadvertent disassembly and provides a traditional means of tightening a loose hilt. The hardwood grip is leather covered. The scabbard is fabricated in glass-filled resin, to provide great impact resistance , to eliminate swelling and to minimize blade corrosion problems. The scabbard now features belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most reenactors will decorate the scabbard to match their persona.

    This fully functional Combat Ready broad sword is tailored to meet the demands of re-enactment and stage combat.

  • Overall Length: 43 3/4"
  • Sword Weight: 3 lbs 3 oz
  • Blade Length: 34"
  • Blade Material: High-carbon forged steel blade 1/16" wide edges and a rounded tip for safety
  • Handle Material: Hardwood grip , Leather covered
  • Scabbard: Wood grained finish
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Swords
    $200.00 each

    # RCCASSH2060TS Paul Chen Scottish Claymore Sword
    Click to Enlarge

    Paul Chen Scottish Claymore Sword
    by Hanwei

    Item # RCCASSH2060TS
    The Paul Chen Scottish Claymore Sword
    Mainstay of the Scottish Highland warriors of the late 15th and 16th centuries, the Claymore had a uniquely styled hilt that sets it apart from other great swords of the period. Typical of hand-and-a-half length, this versatile weapon could deliver great sweeping slashes or powerful thrusts. Replicated from a surviving museum piece the Combat Ready Paul Chen Scottish Claymore Sword is classic in its design, with distinctive sloping quillons terminating in quatrefoils and a high-collared quillon block with langets following the blade fuller. The black leather-covered grip is topped by a globate pommel. Originally carried slung on the back, the Claymore matches perfectly with optional back scabbard.

    This fully functional Combat Ready Scottish Claymore sword is tailored to meet the demands of reenactment and stage combat.

  • Overall Length: 59 3/4"
  • Sword Weight: 4 lbs 14 oz
  • Blade Length: 41"
  • Handle Length: 14"
  • Blade Material: High-carbon forged steel blade
  • Excellent handling and balance
  • Point of Balance: 7"
  • Point of Percussion: 31"
  • Width at Guard: 1.78"
  • Width at Tip: 1.28"
  • Thickness at Guard: 0.24"
  • Thickness at Tip: 0.16"
  • Authentic styling
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready Sword
    $370.00 each Sale $254.00

    # RCCS88HCSTS United States 1860 Federal Heavy Cavalry Saber Sword by Cold Steel
    Click to Enlarge

    United States 1860 Federal Heavy Cavalry Saber Sword
    by Cold Steel

    Fully Functional
    Combat Ready Sword

    Item # RCCS88HCSTS
    The United States 1860 Federal Heavy Cavalry Saber Sword by Cold Steel


    At the outbreak of the American Civil War, there were two types of sabre swords issued to the Federal Cavalry: "light" and "heavy". The light version saber sword was popular, but the heavy model, dubbed the "Old Wrist Breaker" was the one worth owning, as it was a superior weapon. Its 36" blade offered big reach advantages over most sabers, and its substantial weight gave it the leverage to easily crush bones and sever limbs or even a head with a single blow. The brass guard had three bars to protect the hand and the grip was wire bound leather and capped with a sturdy pommel. In its double ringed, steel scabbard, it could be easily attached to a saddle or to a belt.

    After examining and handling a number of original 1860 Heavy Cavalry Sabers, Cold Steel decided to make their own reproduction with a few improvements. The Cold Steel blade is made from 1055 Carbon Steel with a hard spring temper and will pass the British Proof Test.

  • Overall Length: 41 1/2"
  • Blade Length: 36"
  • Blade Thickness: 1/3"
  • Blade Material: 1055 Carbon Steel
  • Weight: 42.9 ounces
  • Handle Material: Brass Guard
  • Scabbard: Included
  • Fully Functional and Combat Ready Sword

    $399.99 each





    # RCCS88WGSTS Two Handed Great Sword by Cold Steel
    Click to Enlarge

    Two Handed Great Sword by Cold Steel

    Item # RCCS88WGSTS
    The Two Handed Great Sword by Cold Steel
    The Two Handed Great Sword is the biggest sword manufactured by Cold Steel. But don't let its size fool you , as there is nothing awkward or clumsy about this awesome sword. Sure it's big and meant to be carried over the shoulder instead of in a scabbard , but it's extremely well balanced and easily wielded by people of larger stature and physical strength. Weighing 6 lbs. 13.5 oz. with a 397/8" high carbon steel blade , it will make short work of pikemen or swordsmen and will prove equally effective against modern rifle butts and bayonets. To protect the hands from opposing weapons , it features a large guard with side rings plus integral parrying hooks that allow the blade to be shortened for close range slashing and stabbing attacks. The handle is made of wood and covered with leather and is extra long to afford a full two handed grip. What's more , it's capped by a heavy steel pommel that helps counter balance its long blade and serves as an effective weapon in its own right. Each sword comes fully sharpened and battle ready and we're sure you will be thrilled with its fantastic fit and finish. If you're looking for the ultimate in big performance oriented swords , your search is over.

  • Overall Length: 55 1/4"
  • Blade Length: 39 7/8"
  • Blade Thickness: 7/32"
  • Weight: 109.5 oz.
  • Blade: 1055 Carbon Steel
  • Handle: 15 3/8" long. Leather Wrapped

    $589.00 each



    # RCCS88HNHTS Hand-and-a-Half Sword by Cold Steel
    Click to Enlarge

    Hand-and-a-Half Sword by Cold Steel
    with Scabbard

    Item # RCCS88HNHTS
    The Hand-and-a-Half Sword by Cold Steel
    We would be hard pressed to think of a more versatile or effective sword than the "Bastard" or "Hand-and-a-Half Sword" offered here. For a sword of this size , it's amazingly light and fast and tips the scales at approximately 3 lbs. Its 33 1/2" long blade is quite wide so it can produce deep shearing type cuts yet pointed enough to be effective in a thrusting attack. Its long handle is suitable for both a one or two handed grip and is fashioned out of wood covered in black leather. To balance the long blade the butt is capped with a beautiful "scent stopper" pommel which can be a lethal weapon in its own right. Every Hand-and-a-Half Sword reflects the highest standards in workmanship and materials and comes fully sharpened and ready for battle! To safely house the blade a very attractive scabbard made of wood covered with black leather and steel throat and chape is also included.

  • Overall Length: 42 5/8"
  • Blade Length: 33 1/2"
  • Blade Thickness: 1/5"
  • Weight: 49 oz.
  • Blade: 1055 Carbon Steel
  • Handle: 9 1/8" long. Leather Wrapped
  • Sheath: Leather/Wood Scabbard with Steel Fittings

    $469.99 each



    # RCCASSH1070TS Paul Chen Practical Katana Sword
    Click to Enlarge

    Paul Chen Practical Katana Sword
    by Hanwei

    Item # RCCASSH1070TS
    The Paul Chen Practical Katana Sword
    The ever-popular combat ready Paul Chen Practical Katana gives the martial artist the opportunity to own and use a Hanwei sword at the cost of an economy sword. The blade is forged and differentially hardened, using the same process as the more expensive blades and producing an HRC60 edge and HRC40 back. The temper line is authentic and prominent. Cost savings are effected by using fittings which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises in the dojo. A replacement Saya is available at $59.00.

    This fully functional combat ready Japanese Katana sword is tailored to meet the demands of reenactment and stage combat.

  • Overall Length: 39 1/2"
  • Sword Weight: 2 lbs 5 oz
  • Blade Length: 27 1/4"
  • Handle Length: 11 1/4"
  • Blade Material: High-carbon forged steel blade, Differentially Hardened
  • Excellent handling and balance
  • Point of Balance: 5 3/4"
  • Width at Guard: 1.22"
  • Width at Tip: 0.87"
  • Thickness at Guard: 0.27"
  • Thickness at Tip: 0.18"
  • Sori: 3/4"
  • Scabbard: included
  • Replacement Saya available
  • Factory: Hanwei China
  • Designer: Paul Chen
  • Rated: Fully Functional Combat Ready sword
    $350.00 each Sale $245.00

    # RCCS88BKTS Warrior Series Katana Sword by Cold Steel
    Click to Enlarge

    Warrior Series Katana Sword by Cold Steel
    Fully Functional
    Combat Ready

    Item # RCCS88BKTS
    The Warrior Series Katana Sword by Cold Steel

    The combat ready Cold Steel Warrior Series Katana sword is expertly crafted , with attention paid to every detail , making this the ideal collector's choice.
    If you are in the market for a strong , good looking , reasonably priced fully functional combat ready Japanese sword , we know you will be happy to own one of these.

  • Overall Length: 40 3/4"
  • Blade Length: 29 3/8"
  • Blade Thickness: 9/32"
  • Blade Material: 1055 Carbon Steel , Sharp
  • Handle Material: Samekawa (Ray Skin) handle with black braid cord with brass Menuki
  • Sword Weight: 40.6 oz.
  • Scabbard: Black Lacquered Wood
  • Fully Functional and Combat Ready
    $549.99 each Sale $474.99






    # RCCS88GTS Gim Sword by Cold Steel
    Click to Enlarge

    Gim Sword by Cold Steel
    with Scabbard

    Item # RCCS88GTS
    The Gim Sword by Cold Steel
    There are two basic types of straight bladed swords used in China. One is fairly long and heavy known as the Wu Jian or "Martial Sword". The other is substantially lighter and called a Wen Jian or "Scholar's Sword" and was primarily carried for personal self defense. After studying books and video tapes on the history and use of both weapons , Cold Steel decided to make their own battle worthy Gim (Wu Jian) for serious collectors and practitioners of Chinese Martial Arts. The blade of their Wu Jian is made out of 1055 spring steel and measures 30" long by 11/2" wide. For cutting and slashing , both edges are quite sharp and they terminate in a strong , useful point for stabbing. The traditionally styled guard and pommel are cast out of thick sturdy brass and fit snugly on a stout Rosewood handle that is both highly decorative as well as functional.
    The Gim Sword comes with an excellent wood scabbard with brass throat , chape and sword rings and can be worn suspended from the belt or slung over the shoulder.

  • Overall Length: 36 1/2"
  • Blade Length: 30"
  • Blade Thickness: 1/4"
  • Weight: 38.8 oz.
  • Blade: 1055 Carbon Steel
  • Handle: 6 1/2" long. Rosewood
  • Sheath: Hardwood Scabbard with Brass Fittings

    $479.99 each



    RCCS88SCFETS Quick Draw Sword Cane by Cold Steel
    Click to Enlarge

    Quick Draw Sword Cane by Cold Steel
    Fully Functional
    Combat Ready

    Item # RCCS88SCFETS
    The Quick Draw Sword Cane by Cold Steel


    Cold Steel has long extolled the benefits of Cane Swords. These stylish and discreet self-defense instruments are non-threatening and merely dapper. Concealed in plain sight until needed - they can leap into action in an instant!

    Cold Steel's latest Sword Cane, the Quick Draw Sword Cane, features a lightweight, durable black aluminum shaft with a rubber ferrule tip to add traction when walking on wet or uneven surfaces.

    A quick, swift pull on the Grivory pistol grip handle will release the friction seal and swiftly deploy a tapered 18 inch long , 8mm thick needle-tipped spike threat- deterrent!

    The Cold Steel Quick Draw Sword Cane is economical, good looking, and easy to use.

  • Overall Length: 37 5/8"
  • Blade Length: 18"
  • Blade Thickness: 8 mm tapering to 3 mm
  • Blade Material: 420J2 Steel cylinder with a strong sharp point
  • Handle Material: Grivory
  • Total Weight: 16 oz.
  • Friction Release
  • Scabbard: Black Anodized Aluminum Shaft
  • Fully Functional and Battle Ready

    $69.99 each



    # RCCS88SCFDTS Heavy Duty Sword Cane by Cold Steel
    Click to Enlarge

    Heavy Duty Sword Cane by Cold Steel
    Fully Functional
    Combat Ready
    Orthopedic Support

    Item # RCCS88SCFDTS
    The Heavy Duty Sword Cane by Cold Steel


    Cold Steel's design concept for the Heavy Duty Sword Cane was to make a swordcane that offered significant orthopedic support, yet be stylish enough so that it didn't look like a stodgy piece of medical equipment.

    The result is a very appealing cane sword with an extra strong partial crook handle made from Grivory, with a black, aluminum shaft that is 2mm thick and heat-treated for strength. The shaft is handsomely tapered and capped with a thick rubber ferrule for better traction on slick, icy sidewalks or uneven terrain.

    The concealed sword is easily released by a hard, quick tug on the handle to break the suction of its friction lock. The Heavy Duty Sword Cane by Cold Steel is an extremely formidable sword too, made from 1055 Carbon Steel, a little over 24" in length and 5.5mm thick. The sword is sturdy enough for both cutting and thrusting, with one long cutting edge, a strong sharp point, and a fully sharpened back edge. The sword is more than enough to take down any attacker, and the heavy aluminum shaft of your cane makes a fine weak hand parrying weapon and a frightfully effective bludgeon in its own right.

  • Overall Length: 38 5/8"
  • Blade Length: 24 1/4"
  • Blade Thickness: 5.5mm
  • Blade Material: 1055 Carbon Steel with One Long Cutting Edge, A Strong Sharp Point, and A Fully Sharpened Back Edge Sharp
  • Handle Material: Grivory Orthopedic Support Handle
  • Handle Length: 7"
  • Total Weight: 37.4 oz.
  • Sword Weight: 16 oz.
  • Friction Release
  • Scabbard: Heavy Duty Aluminum
  • Orthopedic Support
  • Fully Functional and Combat Ready

    $144.99 each Sale $124.99





    Warning:
    All Edged Weapons, Battle Ready or Not, May Injure, Kill
    and/or Become Damaged if Used Improperly


    Read About Sword Care































    Home
  • © CopyrightCombat Ready Swords 2002